Concrete Slab Calculator
Enter the length, width and thickness of a rectangular slab to estimate the concrete you need in cubic yards and cubic feet. You can add a waste allowance and check the formula and assumptions below the result.
Free calculator • US customary units • Clear formulas • Last reviewed October 2026
Calculate with the slab calculator
Enter your measurements and press Calculate. Results appear beside the form on wide screens and below it on phones.
Quick answer: multiply length (ft) × width (ft) × thickness (in) ÷ 12 to get cubic feet, then divide by 27 to get cubic yards. A 10 ft × 10 ft slab that is 4 in thick is 33.33 cubic feet, or 1.23 cubic yards before any waste allowance.

How the slab calculation works
A slab is a rectangular box, so its volume is length × width × thickness. Concrete is sold by the cubic yard, and one cubic yard is 27 cubic feet (3 ft × 3 ft × 3 ft). Because thickness is usually measured in inches, it is divided by 12 to convert it to feet.
Cubic feet = length (ft) × width (ft) × thickness (in) ÷ 12
Cubic yards = cubic feet ÷ 27
With waste = cubic yards × (1 + waste % ÷ 100)
Worked examples
| Slab size | Cubic feet | Cubic yards (no waste) | With 10% waste |
|---|---|---|---|
| 10 × 10 ft, 4 in thick | 33.33 | 1.23 | 1.36 |
| 12 × 12 ft, 6 in thick | 72.00 | 2.67 | 2.93 |
| 20 × 10 ft, 4 in thick | 66.67 | 2.47 | 2.72 |
Figures are straight arithmetic from the formulas above and are rounded to two decimals.
Assumptions and limits
- The slab is a flat, rectangular pour of even thickness. For an L-shaped or irregular slab, calculate each rectangle separately and add the results.
- The waste allowance is your own planning choice. It can cover uneven ground, spillage and form movement. The 10% default is a starting assumption, not a rule.
- The tool does not recommend a thickness. Required thickness, reinforcement and base depend on the use, soil and local building code, so confirm them with a qualified professional.
- Ready-mix suppliers have their own ordering increments and minimum loads. Ask your supplier how they round.
This is an informational estimate, not engineering or construction advice. See the disclaimer and how the calculations work.
Sources
- Volume and unit conversion: standard geometry (volume of a rectangular prism) and the fact that 1 cubic yard = 27 cubic feet. No outside data is used for the result.
Content last reviewed October 2026. No engineering, contractor or other professional credentials are claimed; see the About page.
Frequently asked questions
How do you calculate cubic yards of concrete for a slab?
Multiply length in feet by width in feet by thickness in inches divided by 12 to get cubic feet, then divide by 27. For example, 10 × 10 × (4 ÷ 12) = 33.33 cubic feet, and 33.33 ÷ 27 = 1.23 cubic yards.
How much concrete do I need for a 10 x 10 slab that is 4 inches thick?
About 1.23 cubic yards (33.33 cubic feet) before waste. With a 10% allowance it is about 1.36 cubic yards.
How much extra concrete should I order?
There is no single rule. An allowance covers uneven subgrade, spillage and form movement. This calculator lets you choose the percentage; ask your supplier about their ordering increments and minimum loads.
Does this calculator tell me how thick my slab should be?
No. Thickness depends on how the slab will be used, the soil and local code. Enter the thickness your plans or a qualified professional specify.
Can I use it for a driveway or patio?
Yes, if the area is a rectangle of even thickness. Enter its length, width and thickness. For irregular shapes, split the area into rectangles and add the results.
Related calculators and guides
- Concrete cost per square foot: sourced price ranges
- Concrete patio calculator: patio yards, bags, gravel base and forms
- How many bags of concrete per square foot: bags per sq ft chart by thickness
- Concrete pad calculator: pad yards, bags and gravel base
- Rebar calculator: bars, feet and weight for a slab grid
- Monolithic slab calculator: slab with a thickened edge
- Concrete mix ratio calculator: cement, sand and gravel by parts
- How much is a yard of concrete?: price ranges and short-load fees
- Concrete yard calculator: length, width and depth to cubic yards
- Concrete bag calculator: Number of 40, 50, 60 or 80 lb bags
- Gravel calculator: Cubic yards of gravel, and tons from your own density
- Concrete footing calculator: Rectangular footings and round post holes
- Main concrete calculator: volume, bags and material cost for a slab
- How the calculations work: formulas and assumptions
- Concrete Estimator