Concrete Yard Calculator

Convert feet and inches into cubic yards of concrete. Enter the length and width in feet and the depth in inches, add a number of identical sections if you need them, and get cubic yards, cubic feet, cubic meters and bag counts.

Free calculator • US customary units • Clear formulas • Last reviewed November 2026

Calculate with the yard calculator

Enter your measurements and press Calculate. Results appear below the form.

Quick answer: cubic yards = length ft × width ft × (depth in ÷ 12) ÷ 27. A 12 ft × 12 ft pad that is 4 in thick holds 48 cubic feet, or 1.78 cubic yards, before any waste allowance.

Diagram of the cubic yard formula: length times width times height divided by 27
The formula this calculator uses.

How to figure yards of concrete

Concrete is sold by the cubic yard, but most measurements are in feet and inches. Convert the depth to feet, multiply length × width × depth to get cubic feet, then divide by 27 because a cubic yard is 3 ft × 3 ft × 3 ft.

Cubic feet = length ft × width ft × (depth in ÷ 12)

Cubic yards = cubic feet ÷ 27

Cubic meters = cubic feet × 0.0283168

With waste = result × (1 + waste % ÷ 100)

Bag counts divide the cubic feet by the published yield of QUIKRETE No. 1101: 0.60 ft³ for an 80 lb bag and 0.45 ft³ for a 60 lb bag, rounded up. The waste allowance is a planning assumption, not a standard.

Quick conversion table

Common pad sizes, 4 inches thick, no waste allowance.

SizeCubic feetCubic yards
10 ft × 10 ft33.331.235
12 ft × 12 ft48.001.778
20 ft × 20 ft133.334.938
30 ft × 40 ft400.0014.81

Frequently asked questions

How many cubic feet are in a cubic yard?

27 cubic feet, because a cubic yard is 3 ft × 3 ft × 3 ft.

How do I figure yards of concrete?

Multiply length × width × depth in feet to get cubic feet, then divide by 27. Divide the depth in inches by 12 first.

How many yards of concrete for a 12×12 slab?

A 12 ft × 12 ft slab that is 4 inches thick needs 48 cubic feet, or about 1.78 cubic yards, before waste.

Should I round up the order?

Yes. Ready-mix is ordered in cubic yards, and a waste allowance of about 10 percent is a common planning assumption.

What if I have several pads of the same size?

Enter one pad and the number of identical sections. The calculator multiplies the volume for you.