How Calculations Work

Last updated: October 27, 2026.

Formulas

  • Area (sq ft) = length (ft) × width (ft).
  • Thickness (ft) = thickness (in) ÷ 12.
  • Volume (cu ft) = area × thickness (ft).
  • Volume (cu yd) = cubic feet ÷ 27.
  • Volume with waste (cu yd) = cubic yards × (1 + waste % ÷ 100).
  • Bags = volume with waste in cubic feet ÷ yield per bag, rounded up to a whole bag.
  • Material cost = volume with waste (cu yd) × price per cubic yard that you enter.

Worked example

A 10 ft × 10 ft slab that is 4 in thick has an area of 100 sq ft and a volume of 100 × (4 ÷ 12) = 33.33 cu ft, or 1.2346 cu yd. With a 10% waste allowance the order quantity is 1.2346 × 1.10 = 1.358 cu yd, shown as 1.36.

Rounding and limits

The calculator keeps full precision internally and rounds only the displayed results, to two decimals. Bag counts are always rounded up. It rejects blank, non-numeric, zero and negative entries. Length and width must be 10,000 ft or less, thickness 120 in or less, waste between 0 and 100 percent, and price 100,000 dollars per cubic yard or less.

Bag yields

The optional bag estimate uses published yields for QUIKRETE Concrete Mix No. 1101: 0.30 cu ft for a 40 lb bag, 0.375 cu ft for 50 lb, 0.45 cu ft for 60 lb and 0.60 cu ft for 80 lb (product data sheet revised October 2022). Other products have different yields, so check the label of the bag you plan to buy.

Waste allowance

The 10% default is a planning figure chosen by this site, not an industry standard. You can change it in the calculator.

What is not included

Delivery, taxes, pumping, labor, forms, reinforcement, base preparation, finishing and supplier minimum-load or short-load fees are not part of the calculation.

Calculators that use these methods

The methods above are used by the slab, yard, bag, footing, block and slab cost calculators. See the full list on the calculator hub, or read the about page to learn who runs the site.