Published cost guides put a plain concrete slab at roughly $4 to $12 per square foot installed, with decorative finishes costing more. These ranges come from the guides listed below, checked on November 16, 2026. They are national ranges, not a quote, and local prices differ.
Plain slab cost per square foot: what the guides say
We read four published figures. They differ because each guide uses its own data and definition of “installed,” so treat them as ranges.
| Source | Plain slab, per sq ft | Notes |
|---|---|---|
| HomeGuide (slab cost page) (no date shown) | $6 to $12 installed | Materials $3 to $7, labor $3 to $5 per sq ft |
| HomeGuide (concrete prices page) (no date shown) | $5 to $10 installed | Plain 6 inch slab |
| Bob Vila (published August 2022) | $4.34 to $7.73 | Basic slab |
| Angi (titled 2025 data) | $4 to $16 | Installation range |
Bob Vila’s figures are the oldest, so today’s prices may sit above them.
Cost by thickness
A thicker slab uses more concrete, so the price per square foot rises. HomeGuide lists these installed ranges:
| Thickness | Installed cost per sq ft (HomeGuide) |
|---|---|
| 4 inches | $6 to $8 |
| 6 inches | $8 to $10 |
| 8 inches | $10 to $12 |
Most slabs are 4 to 6 inches thick, according to the same guide. To see how much concrete a given thickness needs, use our concrete slab calculator.
Cost by project type
| Project | HomeGuide | Bob Vila |
|---|---|---|
| Patio | $5 to $15 | $4.40 to $16 |
| Driveway | $4 to $8 | $6 to $14 |
| Stamped concrete | $8 to $19 | $9 to $16.25 |
These come from the HomeGuide slab page and the Bob Vila article above. Estimate your own patio or driveway volume with the patio calculator or the driveway calculator.
Example totals for common sizes
HomeGuide lists these installed totals for a plain slab: 10 x 10 ft (100 sq ft) at $600 to $1,200; 12 x 12 ft (144 sq ft) at $860 to $1,700; and 20 x 20 ft (400 sq ft) at $2,400 to $4,800. A different guide may give different totals for the same size.
Extra costs that change the total
- Gravel base: HomeGuide lists subbase at $10 to $20 per cubic yard.
- Forms: about $2 to $3 per linear foot (HomeGuide).
- Wire mesh and rebar: wire mesh $0.15 to $0.30 per square foot and rebar $0.30 to $0.50 per linear foot (HomeGuide).
- Grading: about $60 per hour (HomeGuide, Bob Vila).
- Removal of old concrete: $2 to $6 per square foot (Angi, Bob Vila).
Ready-mix prices per cubic yard are covered in our guide how much is a yard of concrete, and our bags per square foot chart helps if you are mixing bags yourself.
How to get an accurate price
- Measure the area and decide the thickness.
- Get two or three written quotes from local contractors and ask what each includes: base, forms, reinforcement, finishing and cleanup.
- Ask whether prices change for small jobs, difficult access or decorative finishes.
Frequently asked questions
How much does concrete cost per square foot?
Published cost guides list plain concrete slabs at roughly $4 to $12 per square foot installed, and Angi gives a wider $4 to $16 installation range. Stamped or decorative work costs more, about $8 to $19 per square foot in HomeGuide’s figures.
How much does a 10×10 concrete slab cost?
HomeGuide lists a 10 x 10 ft (100 sq ft) plain slab at $600 to $1,200 installed. Your price depends on thickness, site prep and local labor rates.
Does thickness change the cost per square foot?
Yes. HomeGuide lists about $6 to $8 per square foot for 4 inches, $8 to $10 for 6 inches and $10 to $12 for 8 inches, installed.
Is it cheaper to pour concrete yourself?
Doing the labor yourself removes the labor share of the price, which HomeGuide puts at about 40 to 50 percent. You still pay for materials, forms, tools and your own time, and the work is physically demanding.
Prices vary by region and change often. These figures come from third-party cost guides, last checked November 16, 2026, and are not an offer or a quote.
To price your own slab, try the concrete slab cost calculator.