Concrete Driveway Calculator

Enter the length, width and thickness of a driveway to estimate the concrete in cubic yards and cubic feet, plus an optional gravel base. Optional bag counts use published QUIKRETE yields.

Free calculator • US customary units • Clear formulas • Last reviewed November 2026

Calculate with the driveway calculator

Enter your measurements and press Calculate. Results appear below the form.

Quick answer: concrete volume = length × width × (thickness ÷ 12) cubic feet, divided by 27 for cubic yards. A 20 ft × 12 ft driveway that is 4 in thick holds 80.00 cubic feet, or 2.96 cubic yards, before any waste allowance.

Diagram of the driveway concrete formula: length times width times thickness divided by 27 gives cubic yards
The formula this calculator uses.

How the driveway calculation works

A driveway is a slab, so its concrete volume is area times thickness. Multiply the length by the width to get square feet, multiply by the thickness in feet (inches ÷ 12) to get cubic feet, then divide by 27 for cubic yards.

Cubic feet = length ft × width ft × (thickness in ÷ 12)

Cubic yards = cubic feet ÷ 27

With waste = result × (1 + waste % ÷ 100)

Gravel base = length ft × width ft × (base in ÷ 12) ÷ 27 cubic yards

Bag counts divide the cubic feet by the published yield of QUIKRETE No. 1101: 0.60 ft³ for an 80 lb bag and 0.45 ft³ for a 60 lb bag, rounded up. The waste allowance is a planning assumption, not a standard.

Residential driveways are commonly poured about 4 inches thick, and heavier vehicles often call for 5 to 6 inches. A compacted gravel base is also common, but thickness, reinforcement, joints and frost requirements vary, so confirm the specification with your contractor and local code.

Worked examples

Concrete only, no waste allowance. Volumes are rounded.

Driveway size4 in thick5 in thick6 in thick
10 ft × 20 ft (one car)2.47 yd³3.09 yd³3.70 yd³
12 ft × 20 ft2.96 yd³3.70 yd³4.44 yd³
20 ft × 20 ft (two cars)4.94 yd³6.17 yd³7.41 yd³
24 ft × 30 ft8.89 yd³11.11 yd³13.33 yd³

Frequently asked questions

How much concrete do I need for a driveway?

Multiply length × width × thickness (in feet) and divide by 27. A 20 ft × 12 ft driveway that is 4 in thick needs about 2.96 cubic yards before waste.

How thick should a concrete driveway be?

Residential driveways are commonly about 4 inches thick, and heavier vehicles often call for 5 to 6 inches. Check your local code and contractor.

How many bags of concrete for a driveway?

A 20 ft × 12 ft, 4 in driveway is 80.00 cubic feet, which is about 134 bags of 80 lb mix. Most driveways are ordered as ready-mix instead.

Does this include the gravel base?

The gravel base is shown separately as a volume. It does not include compaction or a waste factor, so ask your supplier how much to order.

Should I add extra for waste?

A waste allowance of about 10 percent is a common planning assumption, not a standard.

Want a total cost, not only yards? Use the concrete slab cost calculator.