Concrete Curb and Gutter Calculator

Estimate the concrete for a curb and gutter run. Enter the length and the curb and gutter dimensions to get cubic yards and bag counts.

Free calculator • US customary units • Clear formulas • Last reviewed November 2026

Use the Concrete Curb and Gutter Calculator

Enter your measurements and press Calculate. Results appear below the form.

Quick answer: A 100 ft run with a 6 x 6 in curb and an 18 in wide, 6 in thick gutter needs about 3.70 cubic yards before waste.

Diagram of the curb and gutter formula: cross-section area times run length divided by 27
The formula this calculator uses.

How to calculate curb and gutter concrete

Find the cross-section area in square feet: (curb width x curb height + gutter width x gutter thickness) divided by 144. Multiply by the length in feet for cubic feet, then divide by 27 for cubic yards.

Cubic yards = (curb W x curb H + gutter W x gutter T) / 144 x length / 27

Add 5 to 10 percent for waste. An 80 lb bag yields about 0.60 cubic feet and a 60 lb bag about 0.45 cubic feet.

Real curbs often have sloped faces or rolled shapes, so check the section on your drawing.

Example

100 ft, curb 6 x 6 in, gutter 18 in wide x 6 in thick: section = (36 + 108) / 144 = 1.0 ft². Volume = 100 ft³ = 3.70 cubic yards, or about 167 bags of 80 lb.

Frequently asked questions

How much concrete is in 100 feet of curb and gutter?

With a 6 x 6 in curb and an 18 x 6 in gutter, about 3.70 cubic yards before waste.

Is this exact for sloped or rolled curbs?

No. It models rectangles, so use it as a planning estimate and confirm the section from your plans.

Planning a curb and gutter pour

Curb and gutter is a long, narrow pour, so small errors in the cross section add up quickly over the run length. Measure the profile on the actual forms, including the gutter width, the curb height and the thickness, and make sure the profile matches what your plans or local standards require.

Common mistakes

Using the finished dimensions instead of the form dimensions, forgetting corners and curves where the run length is longer than a straight line, and ordering no waste for a long pour that cannot be topped up later. Break a long run into sections and order for each.

What to do next

Compare ready-mix with bags using the bag calculator, add base with the gravel calculator, and estimate a straight wall-like section with the wall calculator.

Related tools: concrete slab calculator, concrete yard calculator, concrete bag calculator, slab cost calculator and how much a yard of concrete costs.