Concrete Weight Calculator

Enter the length, width and thickness of a slab or pad and a unit weight to estimate how much the concrete weighs in pounds, tons and kilograms.

Free calculator • US customary units • Clear formulas • Last reviewed November 2026

Calculate with the weight calculator

Enter your measurements and press Calculate. Results appear below the form.

Quick answer: weight = length × width × (thickness ÷ 12) × unit weight. A 10 ft × 10 ft slab that is 4 in thick holds 33.33 cubic feet and weighs about 5,000 lb (2.5 short tons) at 150 lb per cubic foot.

Diagram of the concrete weight formula: volume times density
The formula this calculator uses.

How the weight calculation works

Weight is volume times unit weight. The calculator finds the volume of the slab or pad in cubic feet, then multiplies by the unit weight you enter. Normal-weight concrete is commonly planned at about 150 pounds per cubic foot, which is about 4,050 pounds per cubic yard.

Cubic feet = length ft × width ft × (thickness in ÷ 12)

Pounds = cubic feet × unit weight (lb/ft³)

Short tons = pounds ÷ 2,000; kilograms = pounds × 0.4536

Unit weight changes with the mix, the aggregate and the moisture. Normal-weight mixes are often cited at roughly 140 to 150 lb/ft³, and structural lightweight concrete is often about 90 to 115 lb/ft³. Use the figure from your supplier or mix design when you have it.

Worked examples

All examples use 150 lb per cubic foot. Results are rounded.

SizeCubic feetCubic yardsWeight
10 ft × 10 ft × 4 in33.331.2355,000 lb (2.50 tons)
12 ft × 12 ft × 4 in48.001.7787,200 lb (3.60 tons)
20 ft × 20 ft × 6 in200.007.40730,000 lb (15.00 tons)
1 cubic yard27.001.0004,050 lb (2.03 tons)

Frequently asked questions

How much does a cubic yard of concrete weigh?

At 150 lb per cubic foot, one cubic yard weighs about 4,050 pounds, or roughly 2 short tons. Real mixes commonly range from about 3,800 to 4,200 pounds per yard.

How much does a 4 inch slab weigh?

A 4 inch slab weighs about 50 pounds per square foot at 150 lb/ft³. A 10 ft × 10 ft slab weighs about 5,000 pounds.

Does rebar change the weight?

Slightly. Reinforced concrete is often planned at 150 lb/ft³ or a little more. Enter your own unit weight if you know it.

What is lightweight concrete?

Structural lightweight concrete uses lightweight aggregate and is often about 90 to 115 lb/ft³, so it weighs much less than normal-weight concrete.

Does the weight change as concrete cures?

Fresh concrete contains extra mixing water that gradually leaves, so the cured weight can be a little lower. For planning, a single unit weight is usually enough.