Fence Post Concrete Calculator

Enter the number of posts, the hole size and the post width to estimate the concrete for fence or deck posts in cubic feet, cubic yards and bags. Optional bag counts use published QUIKRETE yields.

Free calculator • US customary units • Clear formulas • Last reviewed November 2026

Calculate with the fence post calculator

Enter your measurements and press Calculate. Results appear below the form.

Quick answer: concrete per post ≈ (π × (hole diameter ÷ 2)² − post width²) × depth ÷ 1,728 cubic feet, with sizes in inches. A 10 in hole that is 36 in deep around a 3.5 in post takes about 1.38 cubic feet, or 2.3 bags of 80 lb, per post.

Diagram of the fence post hole formula: pi times radius squared times depth, minus the post, divided by 27
The formula this calculator uses.

How the post hole calculation works

Each hole is a cylinder, and the post takes up part of it. The concrete is the cylinder volume minus the volume of the post inside it. Sizes are in inches, so the result is divided by 1,728 to convert cubic inches to cubic feet.

Hole volume = π × (diameter ÷ 2)² × depth

Post volume = post width² × depth (square post)

Cubic feet per post = (hole volume − post volume) ÷ 1,728

Total = cubic feet per post × number of posts × (1 + waste % ÷ 100)

Bag counts divide the total by the published yield of QUIKRETE No. 1101: 0.60 ft³ for an 80 lb bag and 0.45 ft³ for a 60 lb bag, rounded up. Use the actual post size, not the nominal one: a 4×4 post measures about 3.5 inches. A common rule of thumb is a hole about three times the post width and a burial depth of about one-third of the post length, but local frost depth and code govern your project.

Worked examples

Each row is one post with no waste allowance. Bag counts are unrounded.

Hole (dia × depth)Post widthCubic feet per post80 lb bags per post
8 in × 30 in3.5 in0.661.10
10 in × 36 in3.5 in1.382.30
12 in × 42 in5.5 in2.013.36

Six posts in 10 in × 36 in holes around 3.5 in posts need about 8.29 cubic feet, or 0.307 cubic yards, before waste.

Frequently asked questions

How much concrete do I need for one fence post?

A 10 in hole that is 36 in deep around a 3.5 in post takes about 1.38 cubic feet, which is about 2.3 bags of 80 lb mix.

How many bags of concrete for 6 fence posts?

Six posts in 10 in × 36 in holes need about 8.29 cubic feet. That is 14 bags of 80 lb mix before any waste allowance.

How wide and deep should a post hole be?

A common rule of thumb is a hole about three times the post width and a burial depth of about one-third of the post length. Local frost depth and building code can require more.

Does this include a gravel base?

No. If you place gravel under the post, subtract that thickness from the depth you enter.

Why round up the bag count?

Bags are sold whole and yields are approximate, so round up and add a small waste allowance.