Concrete Stairs Calculator

Enter the number of steps, the step width, and the rise and run of each step to estimate the concrete for solid poured stairs in cubic feet and cubic yards. Optional bag counts use published QUIKRETE yields.

Free calculator • US customary units • Clear formulas • Last reviewed November 2026

Calculate with the stairs calculator

Enter your measurements and press Calculate. Results appear below the form.

Quick answer: solid stair volume ≈ width × run × rise × n(n+1) ÷ 2, with run and rise in feet. Four steps, 4 ft wide, with a 7 in rise and an 11 in run hold about 21.39 cubic feet, or 0.79 cubic yards, before any waste allowance.

Diagram of the concrete stairs formula: sum of each step volume divided by 27
The formula this calculator uses.

How the stairs calculation works

Solid poured steps stack like blocks. The first step is one rise tall, the second is two rises tall, and so on, and each block is one run deep and as wide as the stairs. Adding the blocks gives n(n+1) ÷ 2 step-blocks for n steps.

Cubic feet = width ft × (run in ÷ 12) × (rise in ÷ 12) × n × (n + 1) ÷ 2

Cubic yards = cubic feet ÷ 27

With waste = result × (1 + waste % ÷ 100)

Bag counts divide the cubic feet by the published yield of QUIKRETE No. 1101: 0.60 ft³ for an 80 lb bag and 0.45 ft³ for a 60 lb bag, rounded up. The waste allowance is a planning assumption, not a standard.

This estimate treats the stairs as solid fill. Stairs cast on a sloped slab with a hollow underside use less concrete, so ask your contractor or supplier for the final order. Local code sets the allowed rise and run; model codes such as the IRC commonly limit risers to 7¾ inches and call for treads at least 10 inches deep.

Worked examples

These are solid steps with no waste allowance. Volumes are rounded.

StepsWidthRise × runCubic feetCubic yards
34 ft7 in × 11 in12.830.475
44 ft7 in × 11 in21.390.792
54 ft7 in × 11 in32.081.188
43 ft7 in × 12 in17.500.648

Frequently asked questions

How do you calculate concrete for steps?

Multiply the step width by the run and the rise (all in feet), then by n(n+1) ÷ 2 for n steps, and divide cubic feet by 27 for cubic yards.

How much concrete do 4 steps need?

Four solid steps that are 4 ft wide with a 7 in rise and an 11 in run need about 21.39 cubic feet, or 0.79 cubic yards, before waste. That is about 36 bags of 80 lb mix.

What are typical step dimensions?

Model codes such as the IRC commonly limit risers to 7¾ inches and require treads of at least 10 inches. Local code governs your project, so check with your building department.

Does this include a landing?

No. A landing is a slab. Use the concrete slab calculator for its volume and add it to the stairs.

Why might the real amount be lower?

The estimate assumes solid fill. Stairs poured over a sloped base or with a hollow underside use less concrete.