Concrete Wall Calculator

Enter the length, height and thickness of a poured concrete wall, and subtract any window or door openings, to estimate the concrete in cubic feet and cubic yards. Optional bag counts use published QUIKRETE yields.

Free calculator • US customary units • Clear formulas • Last reviewed November 2026

Calculate with the wall calculator

Enter your measurements and press Calculate. Results appear below the form.

Openings are windows and doors you will not fill with concrete: width × height of each, added together. Waste is a planning assumption, not a standard.

Quick answer: wall volume = (length × height − openings) × thickness ÷ 12. A solid 20 ft long, 8 ft high, 8 in thick wall holds about 106.67 cubic feet, or 3.95 cubic yards, before any waste allowance.

Diagram of the concrete wall formula: length times height times thickness divided by 27 gives cubic yards
The formula this calculator uses.

How the wall calculation works

A poured wall is a slab standing on its edge, so its volume is face area times thickness. The face area is length × height, minus any openings. The thickness is converted from inches to feet, and cubic feet are divided by 27 for cubic yards.

Net area (sq ft) = length ft × height ft − openings sq ft

Cubic feet = net area × thickness in ÷ 12

Cubic yards = cubic feet ÷ 27

Worked examples

WallCubic feetCubic yards80 lb bags (0.60 cu ft each), no waste
20 ft long, 8 ft high, 8 in thick, no openings106.673.951177.78, so 178 bags
30 ft long, 10 ft high, 6 in thick, 60 sq ft of openings120.004.444200.00, so 200 bags
12 ft long, 6 ft high, 6 in thick, no openings36.001.33360.00, so 60 bags

Bag counts use the QUIKRETE Concrete Mix No. 1101 published yield of approximately 0.60 cubic feet for an 80 lb bag.

Assumptions and limits

  • The tool assumes the forms are filled completely to the dimensions you enter. Bulging forms, thickened corners, pilasters and bond beams need extra concrete.
  • It does not tell you how thick a wall must be, what reinforcement it needs, or what footing it requires. Those depend on the load, soil and local code, so check with your building department or an engineer.
  • Footings and caps are not included.

Sources

  • Bag yield: QUIKRETE Concrete Mix No. 1101 data sheet, revised October 2022 (approximately 0.30, 0.375, 0.45 and 0.60 cubic feet for 40, 50, 60 and 80 lb bags). Read October 2026.
  • Volume: standard geometry (rectangular prism) and 1 cubic yard = 27 cubic feet.

Content last reviewed November 2026.

Frequently asked questions

How do you calculate concrete for a wall?

Cubic feet = (length in feet × height in feet − opening area in square feet) × thickness in inches ÷ 12. Divide by 27 for cubic yards. A 20 ft × 8 ft wall that is 8 in thick holds about 106.67 cubic feet, or 3.95 cubic yards.

How many cubic yards of concrete are in a 6 inch thick wall?

Per 100 square feet of wall face, a 6 in thick wall holds 100 × 0.5 = 50 cubic feet, or about 1.85 cubic yards, before waste.

Do I subtract windows and doors?

If the openings stay open, yes. Add up width × height for each opening and enter the total in the openings field. The tool subtracts it from the wall area.

Should I add extra concrete for waste?

Many people add an allowance for spillage and form variation. The calculator lets you choose 0 to 25 percent. It is a planning assumption, not a standard.

Does the result include the footing or rebar?

No. The result is the wall only. A footing under the wall is a separate volume, which you can estimate with the footing calculator. Reinforcing steel displaces a small amount of concrete, and this tool does not subtract it.