Concrete Column Calculator

Enter the shape, size and height of a round or rectangular concrete column or pier to estimate the concrete in cubic feet and cubic yards. Optional bag counts use published QUIKRETE yields.

Free calculator • US customary units • Clear formulas • Last reviewed November 2026

Calculate with the column calculator

Enter your measurements and press Calculate. Results appear below the form.

Waste is a planning assumption, not a standard. Enter 0 for none.

Quick answer: for a round column, volume = π × (diameter ÷ 2)² × height. A 12 in diameter column that is 8 ft tall holds about 6.28 cubic feet, or roughly 11 bags of 80 lb mix at QUIKRETE’s published yield before any waste allowance.

Diagram of the round column formula: pi times radius squared times height divided by 27
The formula this calculator uses.

How the column calculation works

A rectangular column is a box, so its volume is width × depth × height. A round column is a cylinder, so its volume is π times the radius squared times the height. Sizes in inches are converted to feet first, then cubic feet are divided by 27 for cubic yards.

Round cubic feet = π × (diameter in ÷ 24)² × height ft

Rectangular cubic feet = (width in ÷ 12) × (depth in ÷ 12) × height ft

Cubic yards = cubic feet ÷ 27

Worked examples

ColumnCubic feetCubic yards80 lb bags (0.60 cu ft each), no waste
Round, 12 in diameter, 8 ft tall6.280.23310.47, so 11 bags
Square, 16 in × 16 in, 10 ft tall17.780.65829.63, so 30 bags
Round, 18 in diameter, 10 ft tall17.670.65429.45, so 30 bags

Bag counts use the QUIKRETE Concrete Mix No. 1101 published yield of approximately 0.60 cubic feet for an 80 lb bag.

Concrete for columns: quick examples

If you are searching for how much concrete a column needs, the volume comes straight from its dimensions. These two examples are calculated, not code values, and use the 0.60 cubic foot yield of a QUIKRETE 80 lb bag (No. 1101 data sheet) for the bag counts.

  • Round column, 12 inch diameter, 8 feet tall: about 6.28 cubic feet, or 0.23 cubic yards, which is 11 bags of 80 lb mix.
  • Square column, 12 by 12 inches, 8 feet tall: 8 cubic feet, or 0.30 cubic yards, which is 14 bags of 80 lb mix.

Add a waste allowance in the calculator above, and check your plans for the size, reinforcement and footing the column needs. For the footing under a column, see the concrete footing calculator. For tube forms, see the sonotube concrete calculator.

Assumptions and limits

  • The tool assumes the column is filled completely to the dimensions you enter. Tube forms that bulge or forms that are larger than the nominal size need extra concrete.
  • It does not tell you what size, reinforcement or footing a column needs. Those depend on the load, the structure and local code, so check with your building department or an engineer.
  • Footings, caps and anchor bolts are not included.

Sources

  • Bag yield: QUIKRETE Concrete Mix No. 1101 data sheet, revised October 2022 (approximately 0.30, 0.375, 0.45 and 0.60 cubic feet for 40, 50, 60 and 80 lb bags). Read October 2026.
  • Volume: standard geometry (rectangular prism and cylinder) and 1 cubic yard = 27 cubic feet.

Content last reviewed November 2026.

Frequently asked questions

How do you calculate concrete for a round column?

Cubic feet = π × (diameter in inches ÷ 24)² × height in feet. For a 12 in diameter column that is 8 ft tall, that is about 6.28 cubic feet, or 0.233 cubic yards.

How many bags of concrete do I need for a 12 inch by 8 foot column?

About 10.47 bags of 80 lb mix, so 11 bags, before any waste allowance, using QUIKRETE’s published approximate yield of 0.60 cubic feet per 80 lb bag.

How do you calculate a square or rectangular column?

Multiply width in feet by depth in feet by height in feet. A 16 in × 16 in column that is 10 ft tall is (16 ÷ 12) × (16 ÷ 12) × 10, or about 17.78 cubic feet.

Should I add extra concrete for waste?

Many people add an allowance for spillage, uneven forms and over-excavation. The calculator lets you choose a percentage from 0 to 25. It is a planning assumption, not a standard.

Does the result include the footing or rebar?

No. The result is the volume of the column only. A footing below the column is a separate volume, which you can estimate with the footing calculator. Reinforcing steel displaces a small amount of concrete, and this tool does not subtract it.

Sources and further reading